A.The coolant temperature must be maintained at 180℃
B.The thermostatic bypass valves must be manually opened before the engine is started
C.The pressure cap must be removed while the engine is secured
D.Electrical power to the heater must be secured before the cooling system is drained

A.In a two-stroke/cycle engine, the rings run hotter, requiring the end gap to be greater
B.Some provision must be made in a two-stroke/cycle engine to keep the rings from binding in the ports
C.No gap is required to exist between the ends of the ring when cold in a two-stroke/cycle engine, but a small gap is required in a four-stoke/cycle engine
D.The gaps should be staggered on either side of a piston in a two-stroke/cycle engine, while staggering is not necessary in a four-stroke/cycle engine