單項(xiàng)選擇題

It is a Rule requirement that the Owner should advise LR of any damage which may affect the classification of a ship and that all repairs necessary for the ship to retain her class are carried out to the satisfaction of the Surveyors. In which circumstances, the Owner/Master may not necessary report to the classification?（）

A、Portside anchor lost
B、Starboard auxiliary engine broken down
C、Fresh water cock in Kitchen found drip leaking
D、Cargo hold hopper plating cracked by grab

你可能感興趣的試題

單項(xiàng)選擇題

Under regulation 6(2) of MARPOL Annex VI, ships constructed before 19 May 2005 shall be issued with the IAPP Certificate no later than the first scheduled dry docking after 19 May 2005, but in no case later than 19 May 2008. Ships flying the flag of a State which is not a Party to MARPOL Annex VI and which do not carry an IAPP Certificate after the above dates should be treated in accordance with chapter 3 of these Guidelines. Which deficiency listed below may not cause the detention of the vessel by PSC inspection?（）

A、Absence of valid IAPP Certificate, EIAPP Certificates or Technical Files
B、A diesel engine, with a power output of more than 130 kW, which is installed on board a ship constructed on or after 1 January 2000, or a diesel engine having undergone a major conversion on or after 1 January 2000, which does not comply with the NOx Technical Code
C、the sulphur content of any fuel oil being used on board exceeds 4.5% m/m
D、An incinerator installed on board the ship before 1 January 2000 does not comply with requirements contained in appendix IV to the Annex, or the standard specifications for shipboard incinerators developed by the Organization (resolutions MEPC.76(40) and MEPC.93(45))

單項(xiàng)選擇題

Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

A、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.
B、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 3,5 kgf/cm2. The nozzle diameter is not to be less than 5mm.
C、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 4,0 kgf/cm2. The nozzle diameter is not to be less than 8mm.
D、This is to be carried out at a maximum distance of 2,0m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.

99色精品-9色在线-99色在线-99色视频 国产欧美日产一区二区三区_亚洲精品亚洲人成在线观看_四虎在线精品永久观看_免费一级a一片久久精

你可能感興趣的試題

Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

99色精品-9色在线-99色在线-99色视频国产欧美日产一区二区三区_亚洲精品亚洲人成在线观看_四虎在线精品永久观看_免费一级a一片久久精